Insta-Cure+ Medium 2oz. servo See pics above for dimensions

See pics above for dimensions

6 mm Motor Mount Hole Spacing 30x30mm Motor Idle Current @ 10V 1

Gens Ace will work well for you

Computer Aided Manufacturing allows them to be precision made to very tight tolerances

Insta-Cure+ Medium 2oz. servo See pics above for dimensionsInsta Cure+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1"